16b Delta Sigma Stereo Audio ADC IP

This 16 bit ADC is a complete low cost stereo, audio Analog-to-Digital converter includes digital decimating filter, a third order (Mash2-1) Delta- Sigma ADC, a dc-removal filter. This device is fabricated on 40nm CMOS process, where high speed precision analog circuits are combined with high density logic circuits.

Features

  • 16 BIT STEREO AUDIO ADC AUDIO INTERFACE
  • DC-Removal FILTER
  • 3.3 V/1.1 V analog/digital power supply respectively
  • Zero phase error between channels
  • Linear phase digital filtering
  • Power down mode (auto analog shutdown)
  • Dc Attenuation upto -120dB
  • FSYNC and SCK internally generated

Deliverable

  • Detailed Specification and Integration guide
  • LEF abstract
  • GDSII layout and Mapping files
  • LVS compatible netlist
  • Verilog-A Model

10b-1MSPS SAR ADC IP

Description

This is a successive approximation 10 bit Analog-to-Digital converter. The 10-bit, high speed, low power, 8-channel, successive approximation ADC. The part operates from a single 3.3 V power supply and features throughput rates up to 1 MSPS.The device contains a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 20 MHz.This ADC uses advanced design techniques to achieve very low power dissipation at high throughput rates. The architecture allows for high-performance, low-power ADCs to be packaged in small form factors for today's demanding applications 1467096941sar-adc

Features

    • Output is 10 bit Parallel
    • Conversion time/Sampling frequency = 1 us/1Msps
CLOCK REQUIREMENT
    • 2.5 MHz- 20 MHz
SUPPLY REQUIREMENT
    • 3.3 V Analog/1.1 V Digital
PERFORMANCE
    • INL < +/- 1 LSB
    • DNL < +/- 0.8 LSB
    • OTHER FEATURES
    • Continuous conversion mode
    • Discrete conversion mode

Deliverables

  • Detailed Specification and Integration guide
  • LEF abstract
  • GDSII layout and Mapping files
  • LVS compatible netlist
  • Verilog-A Model

10b-160MHz ADC (802.11 AC AFE) IP

This ADC is a Dual Low area, Low Power 160 MHz,10 bit Pipelined Analog-to-Digital converter with complete internal reference.

Features

  • Output is 10 bit Parallel
  • Conversion rate: 160 MHz max
  • Differential Input = 1.0 Vp-p
  • Low Power/Low Resolution Modes available
  • Latency = 3.5 cycles
  • Complete Internal reference/No need for any package pin or external decoupling capacitor.

Deliverables

  • Technical documents
  • Design Guide

10b-640Mbps (802.11 AC AFE) DAC IP

This is a high frequency dual channel current (source type) steering 10 bit Digital to Analog Converter (DAC). It can source the full scale output current 1.25mA.

Features

    • 10 bit parallel binary unsigned inputs.
    • Full scale current (IFS): 1.25mA at a single output.
    • Maximum sampling frequency (Fs): 640 MHz.
    • Signal to Noise and Distortion Ratio (SNDR) on nyquist band: 57dB @ Fs= 640 MHz.

Deliverables

    • Technical documents
    • Design Guide